Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH Manual de usuario descargar pdf (Pagina 85)

ICC

Figure 86: XIO Instruction Selection

5) Configure the MSG instruction.

a) Set the “Read/Write” field to “Read”, “Target Device” field to “PLC5”,

“Local/Remote” field to “Local”, and “Control Block” to “N20:0”.

b) Upon hitting the <ENTER> key while in the “Control Block” entry box,

the MSG Properties dialog box should appear (or it can be opened by

clicking on the “Setup Screen” button at the bottom of the MSG

instruction). Refer to Figure 87.

Figure 87: MSG Configuration, "General" Tab

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 99 100

Sin comentarios

Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH Manual de usuario Pagina 85