Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH Manual de usuario descargar pdf (Pagina 18)

ICC

6. LED Indicators

6.1 Front Panel

The interface board has 5 bicolor (red/green) LEDs that are visible through the

ASD’s front cover (labeled 2.1 through 2.5).

Interface Status:

Normally solid

green during operation. If a fatal error

occurs, this LED will flash a red error

code. The number of sequential blinks

(followed by 3s of OFF time) indicates

the error code.

EIP Module Status / Reserved:

When the multi-protocol firmware

image (with Ethernet/IP support) is

loaded, this LED conforms to the

prescribed “module status LED”

behavior as dictated in the Ethernet/IP

specification, Volume 2, Chapter 9.

When the Profinet IO firmware image

is loaded, this LED is reserved, and

therefore always OFF.

Interface Status 2.1

EIP Module Status /

Reserved

2.2

EIP Network Status /

Profinet Cnxn Status

2.3

Ethernet Activity 2.4

Heartbeat 2.5

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 99 100

Sin comentarios

Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH Manual de usuario Pagina 18