Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH Manual de usuario descargar pdf (Pagina 84)

ICC

3) Add a MSG instruction to the program.

a) If not already visible, double-click “LAD2” under Project…Program

Files in the controller organizer view to bring up the ladder logic

program.

b) Right click on the default rung number on the left-hand side of the

LAD2 window and select “Insert Rung”.

c) Right click on the rung number of the new editable rung and select

“Append Instruction”.

d) Select the “MSG” instruction from the “Input/Output” classification,

then click OK. Refer to Figure 85.

Figure 85: MSG Instruction Selection

4) Add an XIO element to the program.

a) Right click on the rung number of the rung currently being edited and

select “Append Instruction” again.

b) Select the “XIO” instruction from the “Bit” classification, then click OK.

Refer to Figure 86.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 99 100

Sin comentarios

Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH Manual de usuario Pagina 84