Toshiba Programmable Controller PROSEC T3 Manual de usuario Pagina 76

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 100
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 75
4. Installation and Wiring
(4) Refer to the following table for the size of I/O cables.
Type of module
Cable size
16-point module 0.75~1.25 mm2
32-point module
0.5-0.75 mm2
64-point module 0.1 —0.3 mm2
Use a larger size cable for the common line. For the field-wiring
cable, \ .25 mm^ or larger cable is recommended.
(5) The M3.5 screw is used as a terminal screw. Use an
appropriate crimp-type terminal with a width of 7 mm (0.28 in) or
less for the M3.5 screw.
(6) Do not bind the I/O signal cables and high-voltage or power
cables. Separate them as far as possible. If separation is
difficult, use shielded cables for the I/O signals and ground the
shield at the leading-in point of the control panel.
68 PROSEC T3
Vista de pagina 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 99 100

Comentarios a estos manuales

Sin comentarios